Wednesday, November 14, 2018

Getting Ready for Winter Riding

A few more tasks done to get the Ural ready for cold weather riding. Added the gauntlets which cover the handlebar ends. They do a great job of blocking the wind from your hands and dramatically improve the effectiveness of the heated grips and/or heated gloves. The gauntlets do prevent you from seeing any of the handlebar controls so you do have to do everything from memory. The wiring for the left heated grip had come loose sometime this summer. Probably when I installed the horn as that involved running wires under the tank. It was a simple task to lift up the tank, locate the connector and plug things back together. Since I just replaced the battery last April, I'm going to try relying on that battery instead of installing the group 24 battery that I've used for the last couple of winter.

I swapped the two rear tires (and wheels) so the tire with the almost new tread from the sidecar is now the pusher. The last time I removed the rear wheel was to replace the rubber boot on the driveshaft. At that time, I noticed that one of the brake springs was broken again. In the picture, it's the spring on the lower right. The entire assembly was replaced under warranty about 25k km ago and that included the brakes.

Raceway didn't have any springs in stock when I was in Oregon so I ordered a couple from Ural Northwest. The shipping was almost as much as the parts and they were sitting on the counter when we arrived back in Fairbanks. I used the nice brake adjustment tool that I picked up from an independent Ural mechanic in Maryland who goes by Gobium on the Soviet Steeds Ural forum. This homemade tool made it a snap to adjust both shoes to provide even braking. BTW, the way Raceway had the brake shoes adjusted, one of the pusher brake shoes wasn't even touching the drum. It still looks brand new. Maybe Ural needs to add this tool to their tool roll.

I'm still debating whether to replace the front tire. I still have another brand new tire on the shelf. But the front tire still has some life left so, for now, I’ll leave it as is.

I think the last couple of months have made me feel the cold. I used to be able to work in the garage for hours at a time. Not any more. What should have taken one afternoon has taken me several days...

2 comments:

  1. A heat source in the garage is in order it seems....I don't recall seeing one last time I was there? When its really cold, I use a propane heater and leave the garage door up about a foot....it helps. Just be careful.

    Re your FD wheel splines, mine are looking a bit more pointy, I see a replacement of that component in both our futures. Like oil threads, there's two schools of thought involved....grease regularly or don't grease it at all....

    ReplyDelete
    Replies
    1. There is a hot water heater in the upper corner of the garage and it's set to about 50°F most of the time. If I'm planning to do something out there, I will raise it a bit but it's a losing battle sometimes. The FD was replaced at 30k km so I got some band new splines at the time. They are in great shape as are the ones on the wheels. I grease regularly and use CV joint grease as it's designed for lots of pressure. It is a high-moly grease.

      Delete